Same as support_process_state_wait, but wait for the task TID
(obtained with gettid) from the current process. Since the kernel
might remove the /proc/<pid>/task/<tid>/status at any time if the
thread terminates, the code needs to handle possible
fopen/getline/fclose failures due to an inexistent file.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
It can be useful to be able to write a single-threaded test but run it
as part of a multi-threaded program simply to exercise glibc
synchronization code paths, e.g. the malloc implementation.
This commit adds support to enable this kind of testing. Tests that
define TEST_IN_THREAD, either as TEST_THREAD_MAIN or TEST_THREAD_WORKER,
and then use support infrastructure (by including test-driver.c) will be
accordingly run in either the main thread, or in a second "worker"
thread while the other thread waits.
This can be used in new tests, or to easily make and run copies of
existing tests without modifying the tests themselves.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Using TEST_VERIFY (crname_target != crname) instructs some analysis
tools that crname_target == crname might hold. Under this assumption,
they report a use-after-free for crname_target->offset below, caused
by the previous free (crname).
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
The setrlimit(2) function returns 0 on success and -1 on error, but
several test files were incorrectly checking for a return value of 1
to detect errors. This means the error checks would never trigger,
causing tests to continue silently even when setrlimit() failed.
This commit fixes the error checks in five files to correctly test
for -1, matching both the documented behavior and the pattern used
correctly in other parts of the codebase.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Collin Funk <collin.funk1@gmail.com>
clang issues:
dtotimespec.c:31:25: error: implicit conversion from 'time_t' (aka
'long') to 'double' changes value from 9223372036854775807 to
9223372036854775808 [-Werror,-Wimplicit-const-int-float-conversion]
else if (sec >= 1.0 + TYPE_MAXIMUM (time_t))
~ ^~~~~~~~~~~~~~~~~~~~~
../include/intprops.h:57:4: note: expanded from macro 'TYPE_MAXIMUM'
((t) (! TYPE_SIGNED (t)
\
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
So explicit cast it to double.
Reviewed-by: Sam James <sam@gentoo.org>
On ABIs with defined 'char' was unsigned type, clang fails to build
support_process_state.c with:
support_process_state.c:70:21: error: result of comparison of constant -1 with expression of type 'char' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
70 | if (cur_state == -1)
| ~~~~~~~~~ ^ ~~
1 error generated.
Reviewed-by: Sam James <sam@gentoo.org>
Some tests may trigger the kernel OOM handler under conditions
which are difficult to predict (depending on available RAM and
swap space). If we can determine specific regions which might
do this and this does not contradict the test object, the
functions support_accept_oom (true) and support_accept_oom (false)
can be called at the start and end, and the test driver will
ignore SIGKILL signals.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
On some targets using bool in support/check_mem_access.h resulted
in build error due to stdbool.h not being included, fix this.
See 9be489d778 for details.
Reported-by: Joseph Myers <josmyers@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add check_mem_access(addr) function to check if memory at addr can
be written or read returning false if memory is not accessible.
This function changes signal handler for SIGSEGV and SIGBUS signals
when it is called first, and it is not thread-safe.
Co-authored-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Add 'xfmemopen' wrapper for seamless 'fmemopen' use in tests, following
'xfopen', 'xfclose', etc., and providing a standardized error reporting
facility.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Mode 0777 should be used for directories only because it results
in executable entries (after typical umasks are applied).
Reviewed-by: Arjun Shankar <arjun@redhat.com>
This patch replaces _dl_stack_flags global variable by
_dl_stack_prot_flags.
The advantage is that any convertion from p_flags to final used mprotect
flags occurs at loading of p_flags. It avoids repeated spurious
convertions of _dl_stack_flags, for example in allocate_thread_stack.
This modification was suggested in:
https://sourceware.org/pipermail/libc-alpha/2025-March/165537.html
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
When testing with some kernel versions, support FUSE infrastructure
encounters a FUSE_GETXATTR request, leading to FUSE tests hanging until
timed out. Therefore, pass FUSE_GETXATTR requests from
support_fuse_handle_mountpoint to support_fuse_handle_directory, and
adjust support_fuse_handle_directory to return ENOSYS so that tests can
proceed.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Call support_delete_temp_files to delete temporary files before exit in
support_subprocess.
This partially fixes BZ #33182.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Secure mode is enabled only if SGID actually provides a new privilege,
so we have to drop it before gaining it again.
Fixes commit 3a3fb2ed83
("Fix error reporting (false negatives) in SGID tests")
And simplify the interface of support_capture_subprogram_self_sgid.
Use the existing framework for temporary directories (now with
mode 0700) and directory/file deletion. Handle all execution
errors within support_capture_subprogram_self_sgid. In particular,
this includes test failures because the invoked program did not
exit with exit status zero. Existing tests that expect exit
status 42 are adjusted to use zero instead.
In addition, fix callers not to call exit (0) with test failures
pending (which may mask them, especially when running with --direct).
Fixes commit 35fc356fa3
("elf: Fix subprocess status handling for tst-dlopen-sgid (bug 32987)").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
When running as root, it is likely that we can run under any group.
Pick a harmless group from /etc/group in this case.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Do not build links-dso-program-c with exception (unwinding) support
if libgcc_s is not available. In this case, the unwinder may be
part of libgcc.a or libgcc_eh.a, depending on how GCC was built.
If the unwinder is in libgcc_eh.a only, linking links-dso-program-c
failed before this change. After this change, the exception
handling landing pad is only generated if libgcc_s available,
avoiding an undefined _Unwind_Resume (or equivalent) symbol
reference in the non-libgcc_s case.
Fixes commit ffd36cc27407003a6f9efcb9c16370e3435c5b1d ("support: Use
unwinder in links-dso-program-c only with libgcc_s") and
commit 5dfbc3c43e ("support: Link
links-dso-program-c with libgcc_s only if available").
Add a configure check to detect bootstrapping builds that do not
have libgcc_s.
Fixes commit 3e2be87832 ("support: Link
links-dso-program-c against libgcc_s").
Reviewed-by: Sam James <sam@gentoo.org>
If C++ support is not available, links-dso-program-c is used
instead of the C++ version. The C version was not linked against
libgcc_s, which meant that thread cancellation and the backtrace
function did not work in containers tests in that situation.
Reviewed-by: Sam James <sam@gentoo.org>
Refactor the support_next_to_fault and add the
support_next_to_fault_before method returns a buffer with a protected
page before it, to be able to test buffer underflow accesses.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@redhat.com>
Make sure that numbers never overflow uint32_t in inet_network to
properly validate octets encountered in IPv4 addresses.
Avoid malloca in NSS networks file code because /etc/networks lines
can be arbitrarily long. Instead of handcrafting the input for
inet_network by adding ".0" octets if they are missing, just left shift
the result. Also, do not accept invalid entries, but ignore the line
instead.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
As documented in the glibc manual, “Some systems don’t define the d_name
element sufficiently long”, and it provides an example of using a union to
properly allocate the storage under the dirent.
GCC 15 introduces allocation dead code removal (DCE) for PR117370 in
r15-5255-g7828dc070510f8. This breaks various glibc tests which want
to assert various properties of the allocator without doing anything
obviously useful with the allocated memory.
Alexander Monakov rightly pointed out that we can and should do better
than passing -fno-malloc-dce to paper over the problem. Not least because
GCC 14 already does such DCE where there's no testing of malloc's return
value against NULL, and LLVM has such optimisations too.
Handle this by providing malloc (and friends) wrappers with a volatile
function pointer to obscure that we're calling malloc (et. al) from the
compiler.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
It allows to read directories using the six readdir variants
without writing type-specific code or using skeleton files
that are compiled four times.
The readdir_r subtest for support_readdir_expect_error revealed
bug 32124.
Reviewed-by: DJ Delorie <dj@redhat.com>
This allows to monitor the exact file system operations
performed by glibc and inject errors.
Hurd does not have <sys/mount.h>. To get the sources to compile
at least, the same approach as in support/test-container.c is used.
Reviewed-by: DJ Delorie <dj@redhat.com>
Use static functions for readdir/readdir_r, so that
-D_FILE_OFFSET_BITS=64 does not improperly redirect calls to the wrong
implementation.
Reviewed-by: DJ Delorie <dj@redhat.com>
And include the required licensing information. The only
change is a removed trailing empty line in
LICENSES/exceptions/Linux-syscall-note.
Bundling <linux/fuse.h> is the recommended way to deal with
the evolution of the FUSE userspace interface because
structs change sizes over time. The kernel maintains
compatibility, but source-level compatibility on recompilation
may require additional code that is aware of older struct sizes.
Signed-off-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: DJ Delorie <dj@redhat.com>
Macros will automatically use the correct types, without
having to fiddle with internal glibc macros. It's also
impossible to get the types wrong due to aliasing because
support_check_stat_fd and support_check_stat_path do not
depend on the struct stat* types.
The changes reveal some inconsistencies in tests.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
