When the `power_saving_policy` property is set to bit mask
"Require color accuracy" ABM should be disabled immediately and
any requests by sysfs to update will return an -EBUSY error.
When the `power_saving_policy` property is set to bit mask
"Require low latency" PSR should be disabled.
When the property is restored to an empty bit mask ABM and PSR
can be enabled again.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703051722.328-3-mario.limonciello@amd.com
Use the LRU walker for eviction. This helps
removing a lot of code with weird locking
semantics.
The functionality is slightly changed so that
when trylocked buffer objects are exhausted, we
continue to interleave walks with ticket-locks while
there is still progress made. The list walks are
not restarted in-between evictions.
Also provide a separate ttm_bo_evict_first()
function for its single user. The context of that
user allows sleeping dma_resv locks.
v6:
- Various cleanups suggested by Matthew Brost.
- Fix error return code of ttm_bo_evict_first(). (Matthew Brost)
- Fix an error check that was inverted. (Matthew Brost)
v7:
- Use s64 rather than long (Christian König)
- Early ttm_resource_cursor_fini() in ttm_bo_evict_first().
- Simplify check for bo_moved in ttm_bo_evict_first().
(Christian König)
- Don't evict pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-8-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Rework the TTM swapping to use the LRU walker helper.
This helps fixing up the ttm_bo_swapout() interface
to be consistent about not requiring any locking.
For now mimic the current behaviour of using trylock
only. We could be using ticket-locks here but defer
that until it's deemed necessary. The TTM swapout
functionality is a bit weird anyway since it
alternates between memory types without exhausting
TTM_PL_SYSTEM first.
Intentionally keep pages as the unit of progress since
changing that to bytes is an unrelated change that can
be done later.
v6:
- Improve on error code translation in the swapout callback
(Matthew Brost).
v7:
- Use s64 rather than long.
- Remove ttm_resource_cursor_fini() since it's no longer used.
- Rename ttm_resource_cursor_fini_locked() to
ttm_resource_cursor_fini().
- Don't swap out pinned bos.
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-7-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Provide a generic LRU walker in TTM, in the spirit of drm_gem_lru_scan()
but building on the restartable TTM LRU functionality.
The LRU walker optionally supports locking objects as part of
a ww mutex locking transaction, to mimic to some extent the
current functionality in ttm. However any -EDEADLK return
is converted to -ENOSPC and then to -ENOMEM before reaching
the driver, so that the driver will need to backoff and possibly retry
without being able to keep the ticket.
v3:
- Move the helper to core ttm.
- Remove the drm_exec usage from it for now, it will be
reintroduced later in the series.
v4:
- Handle the -EALREADY case if ticketlocking.
v6:
- Some cleanup and added code comments (Matthew Brost)
- Clarified the ticketlock in the commit message (Matthew Brost)
v7:
- Use s64 rather than long for the target and progress
(Christian König)
- Update documentation to not encourage using pages as a
progress measure. (Christian König)
- Remove cond_resched(). (Christian König)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v6
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-6-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
To address the problem with hitches moving when bulk move
sublists are lru-bumped, register the list cursors with the
ttm_lru_bulk_move structure when traversing its list, and
when lru-bumping the list, move the cursor hitch to the tail.
This also means it's mandatory for drivers to call
ttm_lru_bulk_move_init() and ttm_lru_bulk_move_fini() when
initializing and finalizing the bulk move structure, so add
those calls to the amdgpu- and xe driver.
Compared to v1 this is slightly more code but less fragile
and hopefully easier to understand.
Changes in previous series:
- Completely rework the functionality
- Avoid a NULL pointer dereference assigning manager->mem_type
- Remove some leftover code causing build problems
v2:
- For hitch bulk tail moves, store the mem_type in the cursor
instead of with the manager.
v3:
- Remove leftover mem_type member from change in v2.
v6:
- Add some lockdep asserts (Matthew Brost)
- Avoid NULL pointer dereference (Matthew Brost)
- No need to check bo->resource before dereferencing
bo->bulk_move (Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-5-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Have iterators insert themselves into the list they are iterating
over using hitch list nodes. Since only the iterator owner
can remove these list nodes from the list, it's safe to unlock
the list and when continuing, use them as a starting point. Due to
the way LRU bumping works in TTM, newly added items will not be
missed, and bumped items will be iterated over a second time before
reaching the end of the list.
The exception is list with bulk move sublists. When bumping a
sublist, a hitch that is part of that sublist will also be moved
and we might miss items if restarting from it. This will be
addressed in a later patch.
Changes in previous series:
- Updated ttm_resource_cursor_fini() documentation.
v2:
- Don't reorder ttm_resource_manager_first() and _next().
(Christian König).
- Use list_add instead of list_move
(Christian König)
v3:
- Split into two patches, one cleanup, one new functionality
(Christian König)
- use ttm_resource_cursor_fini_locked() instead of open-coding
(Matthew Brost)
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-4-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
To be able to handle list unlocking while traversing the LRU
list, we want the iterators not only to point to the next
position of the list traversal, but to insert themselves as
list nodes at that point to work around the fact that the
next node might otherwise disappear from the list while
the iterator is pointing to it.
These list nodes need to be easily distinguishable from other
list nodes so that others traversing the list can skip
over them.
So declare a struct ttm_lru_item, with a struct list_head member
and a type enum. This will slightly increase the size of a
struct ttm_resource.
Changes in previous series:
- Update enum ttm_lru_item_type documentation.
v3:
- Introduce ttm_lru_first_res_or_null()
(Christian König, Thomas Hellström)
v5:
- Update also the TTM test code (Xe CI).
Cc: Christian König <christian.koenig@amd.com>
Cc: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240705153206.68526-2-thomas.hellstrom@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
The initial idea of the Colorspace prop was that this maps 1:1 to
InfoFrames/SDP but KMS does not give user space enough information nor
control over the output format to figure out which variants can be used
for a given KMS commit. At the same time, properties like Broadcast RGB
expect full range quantization range being produced by user space from
the CRTC and drivers to convert to the range expected by the sink for
the chosen output format, mode, InfoFrames, etc.
This change documents the reality of the Colorspace property. The
Default variant unfortunately is very much driver specific and not
reflected by the EDID. The BT2020 variants are in active use by generic
compositors which have expectations from the driver about the
conversions it has to do when selecting certain output formats.
Everything else is also marked as undefined. Coming up with valid
behavior that makes it usable from user space and consistent with other
KMS properties for those variants is left as an exercise for whoever
wants to use them.
v2:
* Talk about "pixel operation properties" that user space configures
* Mention that user space is responsible for checking the EDID for sink
support
* Make it clear that drivers can choose between RGB and YCbCr on their
own
Signed-off-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240702143017.2429975-1-sebastian.wick@redhat.com
If a queue is already assigned to the hardware, then a newly submitted
job can start straight away without waiting for the tick. However in
this case the devfreq infrastructure isn't notified that the GPU is
busy. By the time the tick happens the job might well have finished and
no time will be accounted for the GPU being busy.
Fix this by recording the GPU as busy directly in queue_run_job() in the
case where there is a CSG assigned and therefore we just ring the
doorbell.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240703155646.80928-1-steven.price@arm.com
Add helpers to convert between q4 fixed point and integer/fraction
values. Also add the format/argument macros required to printk q4 fixed
point variables. The q4 notation is based on the short variant described
by
https://en.wikipedia.org/wiki/Q_(number_format)
where only the number of fraction bits in the fixed point value are
defined, while the full size is deducted from the container type, that
is the size of int for these helpers. Using the fxp_ prefix, which makes
moving these helpers outside of drm to a more generic place easier, if
they prove to be useful.
These are needed by later patches dumping the Display Stream Compression
configuration in DRM core and in the i915 driver to replace the
corresponding bpp_x16 helpers defined locally in the driver.
v2: Use the more generic/descriptive fxp_q4 prefix instead of drm_x16.
(Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240628164451.1177612-2-imre.deak@intel.com
Panfrost DRM driver uses devfreq to perform DVFS, while using simple_ondemand
devfreq governor by default. This causes driver initialization to fail on
boot when simple_ondemand governor isn't built into the kernel statically,
as a result of the missing module dependency and, consequently, the required
governor module not being included in the initial ramdisk. Thus, let's mark
simple_ondemand governor as a softdep for Panfrost, to have its kernel module
included in the initial ramdisk.
This is a rather longstanding issue that has forced distributions to build
devfreq governors statically into their kernels, [1][2] or has forced users
to introduce some unnecessary workarounds. [3]
For future reference, not having support for the simple_ondemand governor in
the initial ramdisk produces errors in the kernel log similar to these below,
which were taken from a Pine64 RockPro64:
panfrost ff9a0000.gpu: [drm:panfrost_devfreq_init [panfrost]] *ERROR* Couldn't initialize GPU devfreq
panfrost ff9a0000.gpu: Fatal error during GPU init
panfrost: probe of ff9a0000.gpu failed with error -22
Having simple_ondemand marked as a softdep for Panfrost may not resolve this
issue for all Linux distributions. In particular, it will remain unresolved
for the distributions whose utilities for the initial ramdisk generation do
not handle the available softdep information [4] properly yet. However, some
Linux distributions already handle softdeps properly while generating their
initial ramdisks, [5] and this is a prerequisite step in the right direction
for the distributions that don't handle them properly yet.
[1] https://gitlab.manjaro.org/manjaro-arm/packages/core/linux/-/blob/linux61/config?ref_type=heads#L8180
[2] https://salsa.debian.org/kernel-team/linux/-/merge_requests/1066
[3] https://forum.pine64.org/showthread.php?tid=15458
[4] https://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git/commit/?id=49d8e0b59052999de577ab732b719cfbeb89504d
[5] 97ac4d37aa
Cc: Diederik de Haas <didi.debian@cknow.org>
Cc: Furkan Kardame <f.kardame@manjaro.org>
Cc: stable@vger.kernel.org
Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4e1e00422a14db4e2a80870afb704405da16fd1b.1718655077.git.dsimic@manjaro.org
The function ast_crtc_dpms() is left over from when the ast driver
did not implement atomic modesetting. But DPMS is not supported by
atomic modesetting and the helper is only called to enable or
disable the CRTC sync pulses. Inline the function into its callers.
To disable the CRTC, ast sets (AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF)
in VGACRB6. Replace the constants with the correct register constants
for VGACRB6.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-8-tzimmermann@suse.de
The SCREEN_DISABLE bit controls scanout from display memory. The bit
affects all planes, so set it only in the CRTC's atomic enable and
disable functions.
A number of bugs affect this fix. First of all, ast_set_std_regs()
tries to set VGASR1 except for the SD bit. But the read bitmask is
invert, so it preserves anything except the SD bit. Fix this by
re-inverting the read mask.
The second issue is that primary-plane and CRTC helpers modify the
SD bit. The bit controls scanout for all planes, primary and HW
cursor, so set it only in the CRTC code.
Further add a constant to represent the SD bit in VGASR1. Keep the
plane's atomic_disable around to make the DRM framework happy.
v2:
- fix typos in commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-7-tzimmermann@suse.de
Several color registers are programmed in the DPMS code of the CRTC's
atomic_enable helper and the primary plane's atomic_update. It requires
the color format and the display mode.
Both code paths handle different cases: the DPMS's code will not be
executed if the color format changes without a full mode switch. The
plane's code only runs if the color format changes, but ignores
display-mode changes.
The color format is a property of the primary plane, so consolidate all
color-format code in the plane's atomic_update. Remove it from the DPMS
helper.
v2:
- clarify commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-5-tzimmermann@suse.de
Do all mode setting in ast_crtc_helper_mode_set_nofb(), which
always runs after disabling the CRTC and before programming the
planes. Removes implicit synchronization between the CRTC's
atomic disable, enable and the vertical retrace.
Display-mode updates require HW cursors to be disabled. The HW
cursor only picks up changes at vertical retrace periods. So the
CRTC's atomic_disable helper waited for the retrace to delay any
following mode-setting operations, which then happened in
atomic_enable. See [1] for a description of the problem.
With the CRTC helper callback mode_set_nofb, we can now synchronize
and reprogram in the same place. As it always runs before the plane
update, the plane code can be reordered with the CRTC's later
atomic_enable et al.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/series/79914/ # 1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240627153638.8765-4-tzimmermann@suse.de
