The recent sha256 patch uses a GCC pragma to suppress compile errors for
a packed struct, but omits a needed pragma (see related link) and thus
still raises errors: (e.g. on GCC 12.3 armhf)
libbpf_utils.c:153:29: error: packed attribute causes inefficient alignment for ‘__val’ [-Werror=attributes]
153 | struct __packed_u32 { __u32 __val; } __attribute__((packed));
| ^~~~~
Resolve by adding the GCC diagnostic pragma to ignore "-Wattributes".
Link: https://lore.kernel.org/bpf/CAP-5=fXURWoZu2j6Y8xQy23i7=DfgThq3WC1RkGFBx-4moQKYQ@mail.gmail.com/
Fixes: 4a1c9e544b ("libbpf: remove linux/unaligned.h dependency for libbpf_sha256()")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When verifying BPF programs, the check_alu_op() function validates
instructions with ALU operations. The 'offset' field in these
instructions is a signed 16-bit integer.
The existing check 'insn->off > 1' was intended to ensure the offset is
either 0, or 1 for BPF_MOD/BPF_DIV. However, because 'insn->off' is
signed, this check incorrectly accepts all negative values (e.g., -1).
This commit tightens the validation by changing the condition to
'(insn->off != 0 && insn->off != 1)'. This ensures that any value
other than the explicitly permitted 0 and 1 is rejected, hardening the
verifier against malformed BPF programs.
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Fixes: ec0e2da95f ("bpf: Support new signed div/mod instructions.")
Link: https://lore.kernel.org/r/tencent_70D024BAE70A0A309A4781694C7B764B0608@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Andrii Nakryiko says:
====================
libbpf: fix libbpf_sha256() for Github compatibility
Recent reimplementation of libbpf_sha256() introduced issues for libbpf's
Github mirror due to reliance on linux/unaligned.h header. This patch set
fixes those issues to make libbpf source code compatible with Github mirror
setup.
This patch set starts with a bit of organization: we introduce libbpf_utils.c
as a place for generic internal helpers like libbpf_errstr() and
libbpf_sha256(), and move a few existing helpers there. We also clean up
libbpf_strerror_r(), which seems to be a leftover of some previous
refactorings.
And finally, we move libbpf_sha256() from huge libbpf.c into libbpf_utils.c,
following up with fix ups to make its code more Github-friendly.
v1->v2:
- add missed cpu_to_be32() and be32_to_cpu() conversions inside
{get/put}_unaligned_be32() macros;
- target bpf tree (Alexei);
- applied Eric's libbpf_sha256 selftest locally and verified it works;
v1:
https://lore.kernel.org/bpf/20250930212619.1645410-1-andrii@kernel.org/
====================
Link: https://patch.msgid.link/20251001171326.3883055-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
linux/unaligned.h include dependency is causing issues for libbpf's
Github mirror due to {get,put}_unaligned_be32() usage.
So get rid of it by implementing custom variants of those macros that
will work both in kernel and Github mirror repos.
Also switch round_up() to roundup(), as the former is not available in
Github mirror (and is just a subtly more specific variant of roundup()
anyways).
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20251001171326.3883055-6-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
We will segfault once we call realloc in bpf_get_addrs due to
wrong size argument.
Fixes: 6302bdeb91 ("selftests/bpf: Add a kprobe_multi subtest to use addrs instead of syms")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 0e2fb011a0 ("selftests/bpf: Clean up open-coded gettid syscall
invocations") addressed the issue that older libc may not have a gettid()
function call wrapper for the associated syscall.
The uprobe syscall tests got in from tip tree, using sys_gettid in there.
Fixes: 0e2fb011a0 ("selftests/bpf: Clean up open-coded gettid syscall invocations")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull backlight updates from Lee Jones:
"This set is comprised of a couple of small but important fixes and a
number of clean-up and refactoring patches. The fixes correct an EPROM
address for the LP8556 and improve memory allocation safety in the LED
backlight driver.
The remainder of the set is made up of refactoring work to the mp3309c
driver and a series of patches to make a number of drivers more
self-contained by including their own dependencies.
Improvements & Fixes:
- Correct the EPROM start address for the LP8556 to align with the
device's datasheet.
- Use devm_kcalloc() in the LED backlight driver for safer array
allocation with overflow protection.
Cleanups & Refactoring
- Drop an unnecessary call to pwm_apply_args() in the mp3309c driver.
- Modernize struct initialization in the mp3309c driver by using a
compound literal instead of memset.
- Make numerous drivers self-contained by including necessary headers
directly rather than relying on transitive includes from the core
backlight header"
* tag 'backlight-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: rt4831: Include <linux/mod_devicetable.h>
backlight: rave-sp: Include <linux/of.h> and <linux/mod_devicetable.h>
backlight: led_bl: Include <linux/of.h>
backlight: ktd2801: Include <linux/mod_devicetable.h>
backlight: jornada720: Include <linux/io.h>
backlight: da9052_bl: Include <linux/mod_devicetable.h>
backlight: as3711_bl: Include <linux/of.h>
backlight: apple_dwi_bl: Include <linux/mod_devicetable.h>
backlight: Include <linux/of.h>
video: backlight: lp855x_bl: Set correct EPROM start for LP8556
backlight: led_bl: Use devm_kcalloc() for array space allocation
backlight: mp3309c: Initialize backlight properties without memset
backlight: mp3309c: Drop pwm_apply_args()
Pull LED updates from Lee Jones:
"This submission is a mix of new features, a number of fixes, some
clean-up/refactoring and a few Device Tree binding updates. The most
significant changes include new device support for the IS31FL3236A and
QNAP's status LEDs, a number of fixes for the Qualcomm flash, LP55xx,
MAX77705 and QNAP MCU drivers, along with some generic LED consumer
binding documentation and unification.
New Support & Features:
- Add support for the IS31FL3236A LED driver, including an optional
22kHz PWM frequency setting.
- Add support for the red and green status LEDs on QNAP MCU devices.
Improvements & Fixes:
- Fix an issue in the MAX77705 driver where an error value was
assigned but not returned.
- Correctly update the torch current clamp setting in the Qualcomm
flash LED driver to prevent unexpected clamping.
- Add a separate register map for the PMI8998 to the Qualcomm flash
LED driver to handle its unique register layout.
- Fix the state numbering for the USB LED in the QNAP MCU driver to
avoid command conflicts.
- Correct the memory programming address calculation for non-paged
devices like the LP5562 in the LP55xx driver.
- Add Device Tree support to the generic led_get() function, allowing
LEDs to be looked up by name.
Cleanups & Refactoring:
- Fix a spelling mistake in the Kconfig help text for the BD2606MVV
driver.
- Use devm_mutex_init() in the IS31FL319x driver to simplify code.
Device Tree Bindings Updates:
- Drop the redundant '-db' suffix from the IS31FL319x binding.
- Introduce generic LED consumer bindings for referencing LEDs via
phandles.
- Unify the 'leds' property across several bindings to use the new
generic consumer binding.
- Convert the AMS AS3645A LED controller binding to the DT schema
format"
* tag 'leds-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: as3645: Convert to DT schema
leds: led-class: Add Device Tree support to led_get()
dt-bindings: leds: Unify 'leds' property
dt-bindings: leds: Add generic LED consumer documentation
leds: is31fl319x: Use devm_mutex_init()
leds: leds-lp55xx: Use correct address for memory programming
dt-bindings: leds: issi,is31fl319x: Drop 'db' suffix duplicating dtschema
leds: qnap-mcu: Add support for the red and green status LEDs
leds: qnap-mcu: Fix state numbering for USB LED
leds: flash: leds-qcom-flash: Add a separate register map for PMI8998
leds: flash: leds-qcom-flash: Update torch current clamp setting
leds: max77705: Function return instead of variable assignment
leds: Kconfig: Fix spelling mistake "limitiation" -> "limitation"
leds: leds-is31fl32xx: Add support for is31fl3236a
Pull MFD updates from Lee Jones:
"This round of updates contains a fair amount of new device support, a
couple of fixes and some refactoring. The most notable additions
include new drivers for Loongson's Security Engine, RNG and TPM, new
drivers for TI's TPS6594 Power Button and BQ257xx Charger ICs.
The rest of the set provides a return value check fix and a
refactoring to use a more modern GPIO API for the VEXPRESS sysreg
driver, the removal of a deprecated IRQ ACK function from the MC13xxx
RTC driver and a new DT binding for the aforementioned TI BQ257xx
charger.
New Support & Features:
- Add a suite of drivers for the Loongson Security Engine, including
the core controller, a Random Number Generator (RNG) and Trusted
Platform Module (TPM) support.
- Introduce support for the TI TPS6594 PMIC's power button, including
the input driver, MFD cell registration, and a system power-off
handler.
- Add comprehensive support for the TI BQ257xx series of charger ICs,
including the core MFD driver and a power supply driver for the
charger functionality.
Improvements & Fixes:
- Check the return value of devm_gpiochip_add_data() in the VEXPRESS
sysreg driver to prevent potential silent failures.
Cleanups & Refactoring:
- Add a MAINTAINERS entry for the new Loongson Security Engine
drivers.
- Convert the VEXPRESS sysreg driver to use the modern generic GPIO
chip API.
Removals:
- Remove the deprecated and unused mc13xxx_irq_ack() function from
the MC13xxx RTC, input and touchscreen drivers.
Device Tree Bindings Updates:
- Add device tree bindings for the TI BQ25703A charger"
* tag 'mfd-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: simple-mfd-i2c: Add compatible string for LX2160ARDB
mfd: simple-mfd-i2c: Keep compatible strings in alphabetical order
dt-bindings: mfd: twl: Add missing sub-nodes for TWL4030 & TWL603x
dt-bindings: watchdog: Add SMARC-sAM67 support
dt-bindings: mfd: tps6594: Allow gpio-line-names
mfd: intel-lpss: Add Intel Wildcat Lake LPSS PCI IDs
mfd: 88pm886: Add GPADC cell
mfd: vexpress-sysreg: Use more common syntax for compound literals
mfd: rz-mtu3: Fix MTU5 NFCR register offset
mfd: max77705: Setup the core driver as an interrupt controller
mfd: cs42l43: Remove IRQ masking in suspend
mfd: cs42l43: Move IRQ enable/disable to encompass force suspend
mfd: ls2kbmc: Add Loongson-2K BMC reset function support
mfd: ls2kbmc: Introduce Loongson-2K BMC core driver
mfd: bd71828, bd71815: Prepare for power-supply support
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
dt-bindings: mfd: fsl,mc13xxx: Add buttons node
dt-bindings: mfd: fsl,mc13xxx: Convert txt to DT schema
mfd: macsmc: Add "apple,t8103-smc" compatible
...
Pull MMC updates from Ulf Hansson:
"MMC core:
- Improve RPMB frame handling code
- Add support for a new max-sd-hs-hz DT property to limit frequency
- Add support to manage regulator-under-voltage events
- Support regulator-under-voltage for eMMC to mitigate data
corruptions
- Add mmc_read_tuning() to allow a host to validate its tuning
sequence
- Add some helpers to align checks for CMD23 support
- Read the CCCR register for SDIO over SPI rather than the
unsupported CMD7
MMC host:
- Add COMPILE_TEST option for a couple of drivers
- Convert drivers to use the modern PM macros
- dw_mmc-exynos: Enable support for the Exynos8890 variant
- mmc_spi: Don't use crc ack during multiple block read
- renesas_sdhi: Enable 64-bit polling mode for R-Car gen3 and
RZ/G2L SoCs
- rtsx_usb: Add support for over-current-protection
- sdhci-cadence: Add support for multi-block read gap tuning
- sdhci-msm:
- Add support for tuning for SDR50 mode for SD cards
- Enable support for the Lemans variant
- sdhci-pci: Disable SD card clock before update for a few
Intel platforms
- sdhci-pxav3: Add support for UHS pinctrl settings
- tmio: Add 64-bit read/write support in polling mode
MEMSTICK:
- Convert to use timeouts to prevent indefinite waiting
- rtsx_usb: Add support for over-current-protection"
* tag 'mmc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (77 commits)
dt-bindings: mmc: samsung,exynos-dw-mshc: add specific compatible for exynos8890
mmc: select REGMAP_MMIO with MMC_LOONGSON2
mmc: add COMPILE_TEST to multiple drivers
mmc: core: Improve RPMB frame handling code
mmc: core: Fix variable shadowing in mmc_route_rpmb_frames()
mmc: core: Parse and use the new max-sd-hs-hz DT property
dt-bindings: mmc: controller: Add max-sd-hs-hz property
mmc: sdhci-msm: Enable tuning for SDR50 mode for SD card
dt-bindings: mmc: sdhci-msm: Document the Lemans compatible
mmc: sh_mmcif: Remove dummy PM resume callback
dt-bindings: mmc: sdhci-pxa: Add minItems to pinctrl-names
mmc: sdio: Drop dev_pm_domain_detach() call
mmc: dw_mmc-rockchip: use modern PM macros
mmc: dw_mmc-pci: use modern PM macros
mmc: dw_mmc-k3: use modern PM macros
mmc: dw_mmc: exynos: use modern PM macros
mmc: via-sdmmc: use modern PM macros
mmc: sdhci-msm: use modern PM macros
mmc: mtk-sd: use modern PM macros
mmc: wmt-sdmmc: use modern PM macros
...
Pull pmdomain updates from Ulf Hansson:
- amlogic: Add support for S6/S7/S7D power-domains controller
- imx: Add support for i.MX91 power-domains
- marvell: Add support for PXA1908 power-domains
- mediatek:
- Add support for modem power sequence
- Add support for RTFF Hardware in MT8196/MT6991
- qcom: Align power-domain definitions for rpmpd
- rockchip: Default to use power-domain support
- thead: Create auxiliary device along with a corresponding reset
driver
- ti: Synchronize on/off state with HW-state for ti-sci power-domains
* tag 'pmdomain-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (25 commits)
pmdomain: thead: Fix error pointer vs NULL bug in th1520_pd_reboot_init()
pmdomain: thead: create auxiliary device for rebooting
driver: reset: th1520-aon: add driver for poweroff/reboot via AON FW
pmdomain: mediatek: airoha: convert from round_rate() to determine_rate()
pmdomain: rockchip: enable ROCKCHIP_PM_DOMAINS with ARCH_ROCKCHIP
pmdomain: marvell: Add PXA1908 power domains
dt-bindings: clock: marvell,pxa1908: Add syscon compatible to apmu
pmdomain: ti-sci: Set PD on/off state according to the HW state
pmdomain: amlogic: Add support for S6 S7 S7D power domains controller
dt-bindings: power: add Amlogic S6 S7 S7D power domains
pmdomain: mediatek: Convert all SoCs to new style regmap retrieval
pmdomain: mediatek: Add support for RTFF Hardware in MT8196/MT6991
pmdomain: mediatek: Add support for modem power sequences
pmdomain: mediatek: Move ctl sequences out of power_on/off functions
pmdomain: mediatek: Handle SoCs with inverted SRAM power-down bits
pmdomain: mediatek: Refactor bus protection regmaps retrieval
dt-bindings: power: mediatek: Document access-controllers property
pmdomain: remove unneeded 'fast_io' parameter in regmap_config
pmdomain: imx93-blk-ctrl: mask DSI and PXP PD domain register on i.MX91
pmdomain: imx93-blk-ctrl: use ARRAY_SIZE() instead of hardcode number
...
Pull spi updates from Mark Brown:
"There's one big core change in this release, Jonas Gorski has
addressed the issues with multiple chip selects which makes things
more robust and stable. Otherwise there's quite a bit of driver work,
as well as some new drivers several existing drivers have had quite a
bit of work done on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep
as small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that
to fix some bugs and increase performance
- Jonas Gorski has fixed the issues with handling multple chip
selects, making things more robust and scalable
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for
VirtIO controllers"
* tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (74 commits)
spi: ljca: Remove Wentong's e-mail address
spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX
spi: reduce device chip select limit again
spi: don't check spi_controller::num_chipselect when parsing a dt device
spi: drop check for validity of device chip selects
spi: move unused device CS initialization to __spi_add_device()
spi: keep track of number of chipselects in spi_device
spi: fix return code when spi device has too many chipselects
SPI: Add virtio SPI driver
virtio-spi: Add virtio-spi.h
virtio: Add ID for virtio SPI
spi: rpc-if: Add resume support for RZ/G3E
spi: rpc-if: Drop deprecated SIMPLE_DEV_PM_OPS
spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()
spi: spi-nxp-fspi: Add OCT-DTR mode support
spi: spi-nxp-fspi: add the support for sample data from DQS pad
spi: spi-nxp-fspi: Add the DDR LUT command support
spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz
spi: spi-nxp-fspi: extract function nxp_fspi_dll_override()
spi: atmel-quadspi: Add support for sama7d65 QSPI
...
Pull regulator updates from Mark Brown:
"This is a very quiet release for regulator, almost all the changes are
new drivers but we do also have some improvements for the Rust
bindings.
- Additional APIs added to the Rust bindings
- Support for Maxim MAX77838, NXP PF0900 and PF5300, Richtek RT5133
and SpacemiT P1"
* tag 'regulator-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (28 commits)
regulator: dt-bindings: qcom,sdm845-refgen-regulator: document more platforms
regulator: Fix MAX77838 selection
regulator: spacemit: support SpacemiT P1 regulators
regulator: max77838: add max77838 regulator driver
dt-bindings: regulator: document max77838 pmic
rust: regulator: add devm_enable and devm_enable_optional
rust: regulator: remove Regulator<Dynamic>
regulator: dt-bindings: rpi-panel: Split 7" Raspberry Pi 720x1280 v2 binding
regulator: pf530x: Add a driver for the NXP PF5300 Regulator
regulator: dt-bindings: nxp,pf530x: Add NXP PF5300/PF5301/PF5302 PMICs
regulator: scmi: Use int type to store negative error codes
regulator: core: Remove redundant ternary operators
rust: regulator: use `to_result` for error handling
regulator: consumer.rst: document bulk operations
regulator: rt5133: Fix IS_ERR() vs NULL bug in rt5133_validate_vendor_info()
regulator: bd718x7: Use kcalloc() instead of kzalloc()
regulator: rt5133: Fix spelling mistake "regualtor" -> "regulator"
regulator: remove unneeded 'fast_io' parameter in regmap_config
regulator: rt5133: Add RT5133 PMIC regulator Support
regulator: dt-bindings: Add Richtek RT5133 Support
...
Pull regmap updates from Mark Brown:
"This just contains a few small fixes, there's been no substantial
development on regmap this release cycle"
* tag 'regmap-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: use int type to store negative error codes
regmap: Remove superfluous check for !config in __regmap_init()
regmap: mmio: Add missing MODULE_DESCRIPTION()
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
Pull pwm updates from Uwe Kleine-König:
"The core highlights for this cycle are:
- The pca9586 driver was converted to the waveform API
- Waveform drivers automatically provide a gpio chip to make PWMs
usable as GPIOs (The pca9586 driver did that in a driver specific
implementation before)
Otherwise it's the usual mix of fixes and device tree and driver
changes to support new hardware variants"
* tag 'pwm/for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (30 commits)
pwm: cros-ec: Avoid -Wflex-array-member-not-at-end warnings
dt-bindings: pwm: samsung: add exynos8890 compatible
dt-bindings: pwm: apple,s5l-fpwm: Add t6020-fpwm compatible
dt-bindings: pwm: nxp,lpc1850-sct-pwm: Minor whitespace cleanup in example
pwm: pca9586: Convert to waveform API
pwm: pca9685: Drop GPIO support
pwm: pca9685: Make use of register caching in regmap
pwm: pca9685: Use bulk write to atomicially update registers
pwm: pca9685: Don't disable hardware in .free()
pwm: Add the S32G support in the Freescale FTM driver
dt-bindings: pwm: fsl,vf610-ftm-pwm: Add compatible for s32g2 and s32g3
pwm: mediatek: Lock and cache clock rate
pwm: mediatek: Fix various issues in the .apply() callback
pwm: mediatek: Implement .get_state() callback
pwm: mediatek: Initialize clks when the hardware is enabled at probe time
pwm: mediatek: Rework parameters for clk helper function
pwm: mediatek: Introduce and use a few more register defines
pwm: mediatek: Simplify representation of channel offsets
pwm: tiecap: Document behaviour of hardware disable
pwm: Provide a gpio device for waveform drivers
...
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Kontron SMARC-sAM67
- GPD device sensors
- MP29502
- MP2869, MP29608, MP29612 and MP29816 series
Added chip support to existing drivers:
- asus-ec-sensors:
Add B650E-I
Add PRIME Z270-A
Add Pro WS WRX90E-SAGE SE
Add ROG STRIX X670E-E GAMING WIFI
Add ROG STRIX X870-I GAMING WIFI
Add ROG STRIX X870E-E GAMING WIFI
Add ROG STRIX Z690-E GAMING WIFI
Add ROG STRIX Z790E GAMING WIFI II
Add STRIX B850-I GAMING WIFI
Add TUF GAMING X670E PLUS WIFI
Add X670E-I GAMING WIFI
Add Z790-I GAMING WIFI
- dell-smm: Add support for Dell OptiPlex 7040
- ina238: Major cleanup, and
Add support for INA700
Add support for INA780
- k10temp:
Add device ID for Strix Halo
Add support for AMD Family 1Ah-based models
- lenovo-ec-sensors: Update P8 supprt
- lm75: Add NXP P3T1750 support
- pmbus/adm1275: Add sq24905c support
- pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246
- pmbus/mp5990: Add support for MP5998
- sht21: Add support for SHT20, SHT25
- sl28cpld: Add sa67mcu compatible
Other notable changes:
- core:
Handle locking internally
Introduce 64-bit energy attribute support
- cros_ec: Register into thermal framework, improve PWM control
- lm75: allow interrupt for ti,tmp75
- mlxreg-fan: Add support for new flavour of capability register
- sbtsi_temp: AMD CPU extended temperature range support
- sht21: Add devicetree support
Various other minor improvements and fixes"
* tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75
hwmon: (mlxreg-fan) Add support for new flavour of capability register
hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems
hwmon: (cros_ec) register fans into thermal framework cooling devices
hwmon: (cros_ec) add PWM control over fans
platform/chrome: update pwm fan control host commands
hwmon: add SMARC-sAM67 support
dt-bindings: hwmon: sl28cpld: add sa67mcu compatible
hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI
hwmon: (dell-smm) Add support for Dell OptiPlex 7040
hwmon: (dell-smm) Add support for automatic fan mode
hwmon: (gpd-fan) complete Kconfig dependencies
hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex
hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI
hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan()
hwmon: (dell-smm) Remove Dell Precision 490 custom config data
hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI
hwmon: (gpd-fan) Fix range check for pwm input
hwmon: (pmbus/mp5990) add support for MP5998
dt-bindings: trivial-devices: add mps,mp5998
...
Pull chrome platform updates from Tzung-Bi Shih:
"New:
- Add a new API cros_ec_device_registered() for checking if the
cros_ec_deivce is ready
Improvements:
- Use TRAILING_OVERLAP() to fix -Wflex-array-member-not-at-end
warning
- Defer probe until parent EC device is ready in cros_ec_keyb
Cleanups:
- Remove redundant and simplify code in cros_ec_chardev
- Centralize cros_ec_device allocation and initialization to remove
duplicate code"
* tag 'chrome-platform-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
Input: cros_ec_keyb - Defer probe until parent EC device is registered
platform/chrome: cros_ec: Add a flag to track registration state
platform/chrome: cros_ec: Separate initialization from cros_ec_register()
platform/chrome: Centralize common cros_ec_device initialization
platform/chrome: Centralize cros_ec_device allocation
platform/chrome: wilco_ec: Remove redundant semicolons
platform/chrome: cros_ec: Avoid -Wflex-array-member-not-at-end warning
platform/chrome: cros_ec_chardev: Decouple fops from struct cros_ec_dev
platform/chrome: cros_ec_chardev: Remove redundant struct field
Pull driver core updates from Danilo Krummrich:
"Auxiliary:
- Drop call to dev_pm_domain_detach() in auxiliary_bus_probe()
- Optimize logic of auxiliary_match_id()
Rust:
- Auxiliary:
- Use primitive C types from prelude
- DebugFs:
- Add debugfs support for simple read/write files and custom
callbacks through a File-type-based and directory-scope-based
API
- Sample driver code for the File-type-based API
- Sample module code for the directory-scope-based API
- I/O:
- Add io::poll module and implement Rust specific
read_poll_timeout() helper
- IRQ:
- Implement support for threaded and non-threaded device IRQs
based on (&Device<Bound>, IRQ number) tuples (IrqRequest)
- Provide &Device<Bound> cookie in IRQ handlers
- PCI:
- Support IRQ requests from IRQ vectors for a specific
pci::Device<Bound>
- Implement accessors for subsystem IDs, revision, devid and
resource start
- Provide dedicated pci::Vendor and pci::Class types for vendor
and class ID numbers
- Implement Display to print actual vendor and class names; Debug
to print the raw ID numbers
- Add pci::DeviceId::from_class_and_vendor() helper
- Use primitive C types from prelude
- Various minor inline and (safety) comment improvements
- Platform:
- Support IRQ requests from IRQ vectors for a specific
platform::Device<Bound>
- Nova:
- Use pci::DeviceId::from_class_and_vendor() to avoid probing
non-display/compute PCI functions
- Misc:
- Add helper for cpu_relax()
- Update ARef import from sync::aref
sysfs:
- Remove bin_attrs_new field from struct attribute_group
- Remove read_new() and write_new() from struct bin_attribute
Misc:
- Document potential race condition in get_dev_from_fwnode()
- Constify node_group argument in software node registration
functions
- Fix order of kernel-doc parameters in various functions
- Set power.no_pm flag for faux devices
- Set power.no_callbacks flag along with the power.no_pm flag
- Constify the pmu_bus bus type
- Minor spelling fixes"
* tag 'driver-core-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (43 commits)
rust: pci: display symbolic PCI vendor names
rust: pci: display symbolic PCI class names
rust: pci: fix incorrect platform reference in PCI driver probe doc comment
rust: pci: fix incorrect platform reference in PCI driver unbind doc comment
perf: make pmu_bus const
samples: rust: Add scoped debugfs sample driver
rust: debugfs: Add support for scoped directories
samples: rust: Add debugfs sample driver
rust: debugfs: Add support for callback-based files
rust: debugfs: Add support for writable files
rust: debugfs: Add support for read-only files
rust: debugfs: Add initial support for directories
driver core: auxiliary bus: Optimize logic of auxiliary_match_id()
driver core: auxiliary bus: Drop dev_pm_domain_detach() call
driver core: Fix order of the kernel-doc parameters
driver core: get_dev_from_fwnode(): document potential race
drivers: base: fix "publically"->"publicly"
driver core/PM: Set power.no_callbacks along with power.no_pm
driver core: faux: Set power.no_pm for faux devices
rust: pci: inline several tiny functions
...
Extend the list of supported devices with the QIXIS FPGA found on the
LX2160ARDB board.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Reorder the of_device_id structures so that they are in alphabetical
order.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Update the main TI TWL-family binding to be self-contained and to fix
pre-existing validation errors.
To ensure future patches are bisectable, child nodes whose bindings
are in other patches (audio, keypad, usb, etc.) are now defined using
a flexible 'additionalProperties: true' pattern. This removes hard
dependencies between the MFD and subsystem bindings.
The complete dtbs_check for this binding is clean except for two
warnings originating from pre-existing bugs in the OMAP DTS files,
for which fixes have already been submitted separately [1][2].
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Lee Jones <lee@kernel.org>
The SMARC-sAM67 board has an on-board uC which has the same register
interface as the older CPLD implementation on the SMARC-sAL28 board.
Although the MCU emulates the same behavior, be prepared for any quirks
and add a board specific compatible.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Lee Jones <lee@kernel.org>
Setting the signal names in the device tree was already possible, but
it will lead to a warning. Allow the gpio-line-names property to fix
that.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Current implementation describes only MFD's own topsys interrupts.
However, max77705 has a register which indicates interrupt source, i.e.
it acts as an interrupt controller. There's 4 interrupt sources in
max77705: topsys, charger, fuelgauge, usb type-c manager.
Setup max77705 MFD parent as an interrupt controller. Delete topsys
interrupts because currently unused.
Remove shared interrupt flag, because we're are an interrupt controller
now, and subdevices should request interrupts from us.
Fixes: c8d50f0297 ("mfd: Add new driver for MAX77705 PMIC")
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Link: https://lore.kernel.org/r/20250909-max77705-fix_interrupt_handling-v3-1-233c5a1a20b5@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
As pm_runtime_force_suspend() will force the device state to suspend,
the driver needs to ensure no IRQ handlers are currently running. If not
those handlers may find they are now running on suspended hardware
despite holding a PM runtime reference. disable_irq() will sync any
currently running handlers, so move the IRQ disabling to cover the whole
of the forced suspend state to avoid such race conditions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250903094549.271068-6-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Since the display is a sub-function of the Loongson-2K BMC, when the
BMC reset, the entire BMC PCIe is disconnected, including the display
which is interrupted.
Quick overview of the entire LS2K BMC reset process:
There are two types of reset methods: soft reset (BMC-initiated reboot
of IPMI reset command) and BMC watchdog reset (watchdog timeout).
First, regardless of the method, an interrupt is generated (PCIe interrupt
for soft reset/GPIO interrupt for watchdog reset);
Second, during the interrupt process, the system enters bmc_reset_work,
clears the bus/IO/mem resources of the LS7A PCI-E bridge, waits for the BMC
reset to begin, then restores the parent device's PCI configuration space,
waits for the BMC reset to complete, and finally restores the BMC PCI
configuration space.
Display restoration occurs last.
Co-developed-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Acked-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/de4e04b42ff9ee282f86f9bb9efbf959a9848205.1756987761.git.zhoubinbin@loongson.cn
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the txt mc13xxx bindings to DT schema attempting to keep most
information. The nodes codec and touchscreen are not part of the new
schema since it was only briefly mentioned before.
Following the convention, rename led-control to fsl,led-control.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250829201517.15374-6-akurz@blala.de
Signed-off-by: Lee Jones <lee@kernel.org>
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250820-mfd-refcount-v1-1-6dcb5eb41756@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
