perf test '84: probe libc's inet_pton & backtrace it with ping' fails on
s390. Debugging revealed a changed stack trace for the ping command
using probes:
ping 35729 [002] 8006.365063: probe_libc:inet_pton: (3ff9603e7c0)
13e7c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
---> 104371 text_to_binary_address+0xef1 (inlined)
104371 gaih_inet+0xef1 (inlined)
104371 __GI_getaddrinfo+0xef1 (inlined)
5d4b main+0x139b (/usr/bin/ping)
The line "---> text_to_binary_address ..." is new. It was introduced
with glibc version 2.36.7.2 released with Fedora 37 for s390.
Output before
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Output after:
# perf test inet_pton
84: probe libc's inet_pton & backtrace it with ping : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221228145704.2702487-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The test case perf lock contention dumps core on s390. Run the following
commands:
# ./perf lock record -- ./perf bench sched messaging
# Running 'sched/messaging' benchmark:
# 20 sender and receiver processes per group
# 10 groups == 400 processes run
Total time: 2.799 [sec]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ]
#
# ./perf lock contention
Segmentation fault (core dumped)
#
The function call stack is lengthy, here are the top 5 functions:
# gdb ./perf core.24048
GNU gdb (GDB) Fedora Linux 12.1-6.fc37
Core was generated by `./perf lock contention'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start);
(gdb) where
#0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356
#1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957
#2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586
#3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004
#4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254
#5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464
.....
The issue is in function machine__is_lock_function() in file
./util/machine.c lines 3355:
/* should not fail from here */
sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap);
machine->sched.text_end = kmap->unmap_ip(kmap, sym->start)
On s390 the symbol __sched_text_end is *NOT* in the symbol list and the
resulting pointer sym is set to NULL. The sym->start is then a NULL pointer
access and generates the core dump.
The reason why __sched_text_end is not in the symbol list on s390 is
simple:
When the symbol list is created at perf start up with function calls
dso__load
+--> dso__load_vmlinux_path
+--> dso__load_vmlinux
+--> dso__load_sym
+--> dso__load_sym_internal (reads kernel symbols)
+--> symbols__fixup_end
+--> symbols__fixup_duplicate
The issue is in function symbols__fixup_duplicate(). It deletes all
symbols with have the same address. On s390:
# nm -g ~/linux/vmlinux| fgrep c68390
0000000000c68390 T __cpuidle_text_start
0000000000c68390 T __sched_text_end
#
two symbols have identical addresses and __sched_text_end is considered
duplicate (in ascending sort order) and removed from the symbol list.
Therefore it is missing and an invalid pointer reference occurs. The
code checks for symbol __sched_text_start and when it exists assumes
symbol __sched_text_end is also in the symbol table. However this is not
the case on s390.
Same situation exists for symbol __lock_text_start:
0000000000c68770 T __cpuidle_text_end
0000000000c68770 T __lock_text_start
This symbol is also removed from the symbol table but used in function
machine__is_lock_function().
To fix this and keep duplicate symbols in the symbol table, set
symbol_conf.allow_aliases to true. This prevents the removal of
duplicate symbols in function symbols__fixup_duplicate().
Output After:
# ./perf lock contention
contended total wait max wait avg wait type caller
48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a
47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132
5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140
4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8
#
Fixes: 0d2997f750 ("perf lock: Look up callchain for the contended locks")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
subdir is added to the OUTPUT which fails as part of building
install_headers when passed from "make -C tools perf_install".
Committer testing:
The original reporter (see the Link: below) had trouble with this:
$ make -C tools perf_install
That ended up with errors like this:
/var/home/acme/git/perf-urgent/tools/scripts/Makefile.include:17: *** output directory "/var/home/acme/git/perf-urgent/tools/perf/libperf/perf/" does not exist. Stop.
With this patch applied we now get it installed at:
INSTALL /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
As expected:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
-rw-r--r--. 1 acme acme 1146 Jan 3 15:42 /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
And if we clean tools with:
$ make -C tools clean
it gets cleaned up:
$ ls -la /var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h
ls: cannot access '/var/home/acme/git/perf-urgent/tools/perf/libperf/include/perf/bpf_perf.h': No such file or directory
$
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/fa4b3115-d555-3d7f-54d1-018002e99350@secunet.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Starting with glibc 2.35 there are extra inet_pton() calls when doing a
IPv6 ping as in one of the 'perf test' entry, which makes it fail:
# perf test inet_pton
89: probe libc's inet_pton & backtrace it with ping : FAILED!
#
If we look at what this script is expecting (commenting out the removal
of the temporary files in it):
# cat /tmp/expected.aT6
ping[][0-9 \.:]+probe_libc:inet_pton: \([[:xdigit:]]+\)
.*inet_pton\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6|inlined\)$
getaddrinfo\+0x[[:xdigit:]]+[[:space:]]\(/usr/lib64/libc.so.6\)$
.*(\+0x[[:xdigit:]]+|\[unknown\])[[:space:]]\(.*/bin/ping.*\)$
#
And looking at what we are getting out of 'perf script', to match with
the above:
# cat /tmp/perf.script.IUC
ping 623883 [006] 265438.471610: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
29510 __libc_start_call_main+0x80 (/usr/lib64/libc.so.6)
ping 623883 [006] 265438.471664: probe_libc:inet_pton: (7f32bcf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e [unknown] (/usr/bin/ping)
#
We see that its just the first call to inet_pton() that didn't came thru
getaddrinfo(), so if we ignore the first the script matches what it
expects, testing that using 'perf probe' + 'perf record' + 'perf script'
with callchains on userspace targets is producing the expected results.
Since we don't have a 'perf script --skip' to help us here, use tac +
grep to do that, resulting in a one liner that makes this script work on
both older glibc versions as well as with 2.35.
With it, on fedora 36, x86, glibc 2.35:
# perf test inet_pton
90: probe libc's inet_pton & backtrace it with ping : Ok
# perf test -v inet_pton
90: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 627197
ping 627220 1 267956.962402: probe_libc:inet_pton_1: (7f488bf314c0)
1314c0 __GI___inet_pton+0x0 (/usr/lib64/libc.so.6)
fa6c6 getaddrinfo+0x126 (/usr/lib64/libc.so.6)
491e n (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
And on Ubuntu 22.04.1 LTS on a Libre Computer ROC-RK3399-PC arm64 system:
Before this patch it works (see that the script used has no 'tac' to
remove the first event):
root@roc-rk3399-pc:~# dpkg -l | grep libc-bin
ii libc-bin 2.35-0ubuntu3.1 arm64 GNU C Library: Binaries
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1375
ping 1399 [000] 4114.417450: probe_libc:inet_pton: (ffffb3e26120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
And after it continues to work:
root@roc-rk3399-pc:~# grep -w tac ~acme/libexec/perf-core/tests/shell/record+probe_libc_inet_pton.sh
perf script -i $perf_data | tac | grep -m1 ^ping -B9 | tac > $perf_script
root@roc-rk3399-pc:~# perf test inet_pton
86: probe libc's inet_pton & backtrace it with ping : Ok
root@roc-rk3399-pc:~# perf test -v inet_pton
86: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 6995
ping 7019 [005] 4832.160741: probe_libc:inet_pton: (ffffa62e6120)
106120 inet_pton+0x0 (/usr/lib/aarch64-linux-gnu/libc.so.6)
d18bc getaddrinfo+0xec (/usr/lib/aarch64-linux-gnu/libc.so.6)
2b68 [unknown] (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
root@roc-rk3399-pc:~#
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/Y7QyPkPlDYip3cZH@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we have a perf.data file with tracepoints, such as:
# perf evlist -f
probe_perf:lzma_decompress_to_file
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
We end up segfaulting when using perf built with NO_LIBTRACEEVENT=1 by
trying to find an evsel with a NULL 'event_name' variable:
(gdb) run report --stdio -f
Starting program: /root/bin/perf report --stdio -f
Program received signal SIGSEGV, Segmentation fault.
0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
warning: Source file is more recent than executable.
2830 if (event_name[0] == '%') {
Missing separate debuginfos, use: dnf debuginfo-install bzip2-libs-1.0.8-11.fc36.x86_64 cyrus-sasl-lib-2.1.27-18.fc36.x86_64 elfutils-debuginfod-client-0.188-3.fc36.x86_64 elfutils-libelf-0.188-3.fc36.x86_64 elfutils-libs-0.188-3.fc36.x86_64 glibc-2.35-20.fc36.x86_64 keyutils-libs-1.6.1-4.fc36.x86_64 krb5-libs-1.19.2-12.fc36.x86_64 libbrotli-1.0.9-7.fc36.x86_64 libcap-2.48-4.fc36.x86_64 libcom_err-1.46.5-2.fc36.x86_64 libcurl-7.82.0-12.fc36.x86_64 libevent-2.1.12-6.fc36.x86_64 libgcc-12.2.1-4.fc36.x86_64 libidn2-2.3.4-1.fc36.x86_64 libnghttp2-1.51.0-1.fc36.x86_64 libpsl-0.21.1-5.fc36.x86_64 libselinux-3.3-4.fc36.x86_64 libssh-0.9.6-4.fc36.x86_64 libstdc++-12.2.1-4.fc36.x86_64 libunistring-1.0-1.fc36.x86_64 libunwind-1.6.2-2.fc36.x86_64 libxcrypt-4.4.33-4.fc36.x86_64 libzstd-1.5.2-2.fc36.x86_64 numactl-libs-2.0.14-5.fc36.x86_64 opencsd-1.2.0-1.fc36.x86_64 openldap-2.6.3-1.fc36.x86_64 openssl-libs-3.0.5-2.fc36.x86_64 slang-2.3.2-11.fc36.x86_64 xz-libs-5.2.5-9.fc36.x86_64 zlib-1.2.11-33.fc36.x86_64
(gdb) bt
#0 0x000000000055219d in find_evsel (evlist=0xfda7b0, event_name=0x0) at util/sort.c:2830
#1 0x0000000000552416 in add_dynamic_entry (evlist=0xfda7b0, tok=0xffb6eb "trace", level=2) at util/sort.c:2976
#2 0x0000000000552d26 in sort_dimension__add (list=0xf93e00 <perf_hpp_list>, tok=0xffb6eb "trace", evlist=0xfda7b0, level=2) at util/sort.c:3193
#3 0x0000000000552e1c in setup_sort_list (list=0xf93e00 <perf_hpp_list>, str=0xffb6eb "trace", evlist=0xfda7b0) at util/sort.c:3227
#4 0x00000000005532fa in __setup_sorting (evlist=0xfda7b0) at util/sort.c:3381
#5 0x0000000000553cdc in setup_sorting (evlist=0xfda7b0) at util/sort.c:3608
#6 0x000000000042eb9f in cmd_report (argc=0, argv=0x7fffffffe470) at builtin-report.c:1596
#7 0x00000000004aee7e in run_builtin (p=0xf64ca0 <commands+288>, argc=3, argv=0x7fffffffe470) at perf.c:330
#8 0x00000000004af0f2 in handle_internal_command (argc=3, argv=0x7fffffffe470) at perf.c:384
#9 0x00000000004af241 in run_argv (argcp=0x7fffffffe29c, argv=0x7fffffffe290) at perf.c:428
#10 0x00000000004af5fc in main (argc=3, argv=0x7fffffffe470) at perf.c:562
(gdb)
So check if we have tracepoint events in add_dynamic_entry() and bail
out instead:
# perf report --stdio -f
This perf binary isn't linked with libtraceevent, can't process probe_perf:lzma_decompress_to_file
Error:
Unknown --sort key: `trace'
#
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/Y7MDb7kRaHZB6APC@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commands such as kmem, kwork, lock, sched, trace and timechart depend on
libtraceevent, these commands need to be isolated using HAVE_LIBTRACEEVENT
macro when cmdlist generation.
The output of the generate-cmdlist.sh script is as follows:
# ./util/generate-cmdlist.sh
/* Automatically generated by ./util/generate-cmdlist.sh */
struct cmdname_help
{
char name[16];
char help[80];
};
static struct cmdname_help common_cmds[] = {
{"annotate", "Read perf.data (created by perf record) and display annotated code"},
{"archive", "Create archive with object files with build-ids found in perf.data file"},
{"bench", "General framework for benchmark suites"},
{"buildid-cache", "Manage build-id cache."},
{"buildid-list", "List the buildids in a perf.data file"},
{"c2c", "Shared Data C2C/HITM Analyzer."},
{"config", "Get and set variables in a configuration file."},
{"daemon", "Run record sessions on background"},
{"data", "Data file related processing"},
{"diff", "Read perf.data files and display the differential profile"},
{"evlist", "List the event names in a perf.data file"},
{"ftrace", "simple wrapper for kernel's ftrace functionality"},
{"inject", "Filter to augment the events stream with additional information"},
{"iostat", "Show I/O performance metrics"},
{"kallsyms", "Searches running kernel for symbols"},
{"kvm", "Tool to trace/measure kvm guest os"},
{"list", "List all symbolic event types"},
{"mem", "Profile memory accesses"},
{"record", "Run a command and record its profile into perf.data"},
{"report", "Read perf.data (created by perf record) and display the profile"},
{"script", "Read perf.data (created by perf record) and display trace output"},
{"stat", "Run a command and gather performance counter statistics"},
{"test", "Runs sanity tests."},
{"top", "System profiling tool."},
{"version", "display the version of perf binary"},
#ifdef HAVE_LIBELF_SUPPORT
{"probe", "Define new dynamic tracepoints"},
#endif /* HAVE_LIBELF_SUPPORT */
#if defined(HAVE_LIBTRACEEVENT) && (defined(HAVE_LIBAUDIT_SUPPORT) || defined(HAVE_SYSCALL_TABLE_SUPPORT))
{"trace", "strace inspired tool"},
#endif /* HAVE_LIBTRACEEVENT && (HAVE_LIBAUDIT_SUPPORT || HAVE_SYSCALL_TABLE_SUPPORT) */
#ifdef HAVE_LIBTRACEEVENT
{"kmem", "Tool to trace/measure kernel memory properties"},
{"kwork", "Tool to trace/measure kernel work properties (latencies)"},
{"lock", "Analyze lock events"},
{"sched", "Tool to trace/measure scheduler properties (latencies)"},
{"timechart", "Tool to visualize total system behavior during a workload"},
#endif /* HAVE_LIBTRACEEVENT */
};
Fixes: 378ef0f5d9 ("perf build: Use libtraceevent from the system")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221226085703.95081-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fc)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This is unneeded since commit 69304379ff ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f95
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f95 ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
commit 3d57e1b7b1 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f95 ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac169 ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf44 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac169 ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf44 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
Pull io_uring fixes from Jens Axboe:
- Two fixes for mutex grabbing when the task state is != TASK_RUNNING
(me)
- Check for invalid opcode in io_uring_register() a bit earlier, to
avoid going through the quiesce machinery just to return -EINVAL
later in the process (me)
- Fix for the uapi io_uring header, skipping including time_types.h
when necessary (Stefan)
* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
uapi:io_uring.h: allow linux/time_types.h to be skipped
io_uring: check for valid register opcode earlier
io_uring/cancel: re-grab ctx mutex after finishing wait
io_uring: finish waiting before flushing overflow entries
Pull KUnit fix from Shuah Khan:
- alloc_string_stream_fragment() error path fix to free before
returning a failure.
* tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: alloc_string_stream_fragment error handling bug fix
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c8 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f79 ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes: 84fef62d13 ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
This adds a document about what specification features are supported by
the Linux NVMe driver, and what qualifies for a quirk if an implementation
has problems following the specification.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
The recent code refactoring for HD-audio HDMI codec driver caused a
regression on AMD/ATI HDMI codecs; namely, PulseAudioand pipewire
don't recognize HDMI outputs any longer while the direct output via
ALSA raw access still works.
The problem turned out that, after the code refactoring, the driver
assumes only the dynamic PCM assignment, and when a PCM stream that
still isn't assigned to any pin gets opened, the driver tries to
assign any free converter to the PCM stream. This behavior is OK for
Intel and other codecs, as they have arbitrary connections between
pins and converters. OTOH, on AMD chips that have a 1:1 mapping
between pins and converters, this may end up with blocking the open of
the next PCM stream for the pin that is tied with the formerly taken
converter.
Also, with the code refactoring, more PCM streams are exposed than
necessary as we assume all converters can be used, while this isn't
true for AMD case. This may change the PCM stream assignment and
confuse users as well.
This patch fixes those problems by:
- Introducing a flag spec->static_pcm_mapping, and if it's set, the
driver applies the static mapping between pins and converters at the
probe time
- Limiting the number of PCM streams per pins, too; this avoids the
superfluous PCM streams
Fixes: ef6f5494fa ("ALSA: hda/hdmi: Use only dynamic PCM device allocation")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216836
Co-developed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20221228125714.16329-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Commit 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
